Sumitomo Lynx-CustomFit™ Splice-On Connector.png
Sumitomo Lynx-CustomFit™ Splice-On Connector.png

Sumitomo Lynx-CustomFit™ Splice-On Connector (SOC)

$0.00

Field-Installable Fusion Splice-On Connectors (SOC)

Product Overview

  • Product Name: Sumitomo Lynx-CustomFit™ Splice-On Connectors

  • Manufacturer: Sumitomo Electric Industries

  • Category: Field-Installable Fusion Splice-On Connectors (SOC)

  • Connector Types: LC, SC, FC, ST, and MPO formats

Field-Installable Fusion Splice-On Connectors (SOC)

Product Overview

  • Product Name: Sumitomo Lynx-CustomFit™ Splice-On Connectors

  • Manufacturer: Sumitomo Electric Industries

  • Category: Field-Installable Fusion Splice-On Connectors (SOC)

  • Connector Types: LC, SC, FC, ST, and MPO formats

Sumitomo Lynx-CustomFit Splice-On Connectors

Sumitomo Lynx-CustomFit™ Splice-On Connectors

Field-Installable Fusion Splice Connectors for LC, SC, FC, ST & MPO

The Sumitomo Lynx-CustomFit™ Splice-On Connector (SOC) enables fast, precise field terminations without the need for manual polishing or epoxy curing. By fusing factory-polished ferrule stubs directly to field fibers, Lynx-CustomFit delivers factory-grade low optical loss, eliminates splice tray management, and simplifies custom-length patch cord creation in data centers and telecommunications facilities.

Key Features & Highlights

  • No Polish & No Epoxy: Factory-polished ferrule stubs end the need for manual polishing films, index gels, or curing ovens.
  • Low Optical Loss: Fusion splicing direct to ferrule stub delivers ultra-low insertion loss (typ. 0.15dB SMF / 0.10dB MMF).
  • Slackless Cable Management: Cuts build times and clutter by producing custom-length patch cords directly on-site.
  • Fast Installation: Full connector assembly completed in under 3 minutes using standard fusion splicers.
  • Telcordia Compliant: Built to meet Telcordia GR-326-CORE, GR-1081-CORE, ANSI/TIA-568.3, and IEC standard requirements.

Technical Specifications

Parameter Specification
Available Formats LC, SC, FC, ST, MPO
Polish Types UPC, APC (Single-mode); PC (Multimode)
Supported Media 250µm bare fiber, 900µm buffer, 1.6mm, 2.0mm, 3.0mm, and 4.8mm cords
Fiber Compatibility Single-Mode (G.652D, G.657.A1); Multi-Mode (OM1, OM2, OM3, OM4, OM5)
Typical Insertion Loss Single-mode: 0.15 dB | Multimode: 0.10 dB
Max Insertion Loss Single-mode: ≤ 0.30 dB | Multimode: ≤ 0.25 dB
Return Loss APC: ≥ 65 dB | UPC: ≥ 55 dB | MMF: ≥ 30 dB
Operating Temperature -40°C to +70°C
Standards Compliance Telcordia GR-326-CORE, GR-1081-CORE, ANSI/TIA-568.3, IEC 61754 series
Scroll horizontally to view full table on smaller screens →

Fewer partsto provide
an error-free assembly