JR-7-Thermal-Jacket-Remover-3.png
JR-7-Thermal-Jacket-Remover-2.png
JR-7-Thermal-Jacket-Remover-3.png
JR-7-Thermal-Jacket-Remover-2.png

Sumitomo JR-7

$0.00

Sumitomo JR-7 Thermal Jacket Stripper

Key Features

  • Multi-Fiber Capability: Strips single fibers as well as multi-fiber ribbon cables (up to 12-fiber ribbon).

  • Controlled Thermal Heating: Preset temperature settings allow clean removal of jackets without damaging glass claddings.

  • Ergonomic & Durable Design: Rugged metal construction built for harsh field environments with a comfortable hand grip.

  • Fast Heat-Up Time: Rapid heating mechanism minimizes cycle time during high-volume ribbon splicing operations.

  • Power Versatility: Powered via internal battery, AC adapter, or directly connected to compatible Sumitomo fusion splicers.

Sumitomo JR-7 Thermal Jacket Stripper

Key Features

  • Multi-Fiber Capability: Strips single fibers as well as multi-fiber ribbon cables (up to 12-fiber ribbon).

  • Controlled Thermal Heating: Preset temperature settings allow clean removal of jackets without damaging glass claddings.

  • Ergonomic & Durable Design: Rugged metal construction built for harsh field environments with a comfortable hand grip.

  • Fast Heat-Up Time: Rapid heating mechanism minimizes cycle time during high-volume ribbon splicing operations.

  • Power Versatility: Powered via internal battery, AC adapter, or directly connected to compatible Sumitomo fusion splicers.

Sumitomo JR-7 Thermal Jacket Remover

Key Features & Highlights

  • 30% Reduced Stripping Force: Redesigned pivot reduces mechanical force requirements, minimizing operator hand strain during mass splicing projects.
  • Vibration Ready Notification: Integrated haptic engine vibrates to signal heating completion for exact processing times.
  • Built-In LED Lighting: Brightly illuminates the heating chamber for dark or low-visibility work environments.
  • Rugged Metal Lid & IPX2: Shock-resistant metal hinge structure with IPX2 water-drip protection.
  • 4-Level Temperature Control: Heat options from approx. 80°C to 140°C adjust to diverse coating types.
  • Flexible Power Options: Powered via internal BU-6A battery, AC adapter (ADC-1220S), or directly from a Sumitomo fusion splicer via DC cord.

Technical Specifications

Parameter Specification
Applicable Fiber Single Silica Fiber (φ0.2–0.4 mm) & 2 to 12-Fiber Ribbon Cables (0.2–0.4 mm thickness)
Cladding Diameter 125 µm
Coating Material UV-cured resin
Coating Removal Length Up to 35 mm
Temperature Settings 4 selectable levels (approx. 80°C to 140°C)
Notifications & Lighting Haptic vibration, LED heating stage light, 4-step LED battery status indicator
Removal Cycles Approx. 600 cycles per charge (Power Save Mode)
Power Supply Internal BU-6A battery (1940 mAh), ADC-1220S AC adapter, or 9–15V DC cord from splicer
Dimensions & Weight 46 (W) x 146 (D) x 37.5 (H) mm | Approx. 253 g (with battery)
Environmental Protection Operating: 0°C to +40°C | IPX2 Water Resistance
Replacement Parts JR-7BL Blades, BU-6A Battery, ADC-1220S AC Adapter, PC-B(C) DC Cord
Scroll horizontally to view full table on smaller screens →

Packed with a wide range of innovative features
to revolutionise on-site operations.