wd-red 10.png
wd-red 8.png
wd-red 4.png
wd-red 2.png
wd-red 8.png
wd-red 10.png
wd-red 8.png
wd-red 4.png
wd-red 2.png
wd-red 8.png

WD Red Plus Internal NAS HDD 3.5"

$0.00

Model: WD100EFGX, WD101EFBX, WD20EFPX, WD40EFPX, WD80EFPX

WD Red Plus internal HDDs are designed to handle workloads for power users and small to medium business NAS environments. WD Red Plus drives deliver the speed and capacity required to store, protect and share growing amounts of data in mid-sized RAID-optimized NAS systems with increased power efficiency.

Model:

Model: WD100EFGX, WD101EFBX, WD20EFPX, WD40EFPX, WD80EFPX

WD Red Plus internal HDDs are designed to handle workloads for power users and small to medium business NAS environments. WD Red Plus drives deliver the speed and capacity required to store, protect and share growing amounts of data in mid-sized RAID-optimized NAS systems with increased power efficiency.

Powerful internal HDDs designed for performance, reliability and power efficiency in small to medium NAS environments.

WD Red Plus internal HDDs are designed to handle workloads for power users and small to medium business NAS environments. WD Red Plus drives deliver the speed and capacity required to store, protect and share growing amounts of data in mid-sized RAID-optimized NAS systems with increased power efficiency.

Tuned for NAS with NASware™
Western Digital’s exclusive NASware™ technology fine tunes drive parameters to match NAS system workloads which helps increase performance and reliability.

Designed for Continuous Operation
Since your NAS system is always on, a reliable drive is essential. WD Red Plus hard drives are designed for systems that operate 24x7, giving users the confidence of knowing they can reliably access their data.

Tested for Dependable Compatibility
Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS enclosures.

Optimized for Lower TCO
WD Red Plus drives are engineered to use less power (versus previous models) and run cooler, which reduces operating costs and helps reduce heat in thermally challenged NAS boxes.

Powered for Strong Performance
Despite using less power, the drives have plenty of bandwidth to handle the mixed performance demands of multi-drive NAS systems.

Balanced for Increased Reliability
Hard drives that are not properly balanced may cause excessive vibration and noise in multi-drive systems, which could reduce hard drive life span and degrade the performance over time. Our enhanced dual-plane balance control technology significantly improves balance and increases overall drive performance and reliability.

Backed by World-Class Support and Warranty
As an industry-leading hard drive manufacturer, Western Digital stands behind their NAS storage solutions with the assurance of a 3-year limited warranty and world-class support services for hassle free data storage.

Desktop drives vs. WD Red® Plus
It is important to choose a drive purpose-built for RAID-optimized NAS systems to ensure optimum performance and preserve your valuable data. Take the following into consideration when choosing a hard drive for your NAS:

  • Compatibility: Unlike desktop drives, WD Red Plus hard drives are specifically designed and tested for NAS and include NASware™ technology which fine tunes drive parameters to match NAS system workloads for optimum performance.

  • Reliability: Desktop drives aren’t typically designed for the demands of an always-on NAS environment. WD Red Plus hard drives are designed to perform under tough conditions encountered in high-intensity 24x7 multi-user NAS environments.

  • RAID Ready: WD Red hard drives are engineered with RAID error recovery control to help reduce failures within multi-bay NAS systems, unlike most desktop drives that are configured for generic use.

  • Noise and Vibration Protection: Designed to operate solo, desktop drives typically offer little or no protection from the noise and vibration present in a multi-drive system. WD Red hard drives include Rotation Vibration (RV) sensors that anticipate and proactively counteract disturbances caused by increased vibration often found in multi-bay NAS systems.

Available Models

  • WD Red Plus 2TB SATA 6Gb/s 3.5" NAS Internal Hard Drive , 64MB Cache, 5400rpm Speed, Up to 175 MB/s Sustained Transfer Rate, 1 Million Hours MTBF, Supports up to 180 TB/yr Workload Rate | WD20EFPX

    • Tuned for NAS with NASware™

    • Designed for Continuous Operation

    • Balanced for Increased Reliability

    • Optimized for Lower TCO

  • WD Red Plus 4TB SATA 6Gb/s 3.5" NAS Hard Disk Drive, 5400 RPM Class, 256MB Cache, 3D Active Balance Plus, Up to 180 TB/yr Workload Rate, NASware Firmware for Compatibility | WD40EFPX

  • Western Digital 8TB WD Red Plus 3.5" SATA 6 Gb/s NAS Internal Hard Drive, 5640 RPM Speed, 256 MB Cache, Up to 215MB/s Transfer Rate, CMR, 1M hours MTBF | WD80EFPX

    Key Features

    • 8TB Storage Capacity

    • 3.5" Form Factor

    • SATA III 6 Gb/s Interface

    • 256MB Cache

    • 5640 rpm

    • Data Transfer Speeds up to 215 MB/s

    • 600,000 Load/Unload Cycles

    • 1 Million Hours MTBF

    • Dual-Plane Balance Control

  • Western Digital Red Plus 3.5" Internal NAS HDD, 10TB Capacity, Up to 260MB/s Transfer Rate, 7200 RPM Disk Speed, 512 MB Cache Size, 180 TBW Endurance, CMR Recording Technology | WD100EFGX

    • Ideal for Home Offices, Power Users, Small to Medium Businesses and Consumer/Commercial NAS systems

    • For RAID-optimized NAS systems with up to 8 bays

    • Rated for 180TB/year workload1 and 1M hours MTBF

  • WD Red Plus 10TB NAS Hard Disk Drive, 7200 RPM Class, CMR, SATA 6Gb/s, 256MB Cache, 3.5'' Form Factor, Up to 215 MB/s Sustained Transfer Rate, 1 Million Hours MTBF | WD101EFBX