OriginalImage.jpg
LPH-18.jpg
LPH-20.jpg
LPV-35.jpg
LPV-60.jpg
LPV-100.jpg
LPVL-150.jpg
LPV-150.jpg
LPHC-18.jpg
LPC-20.jpg
LPC-35.jpg
LPC-60.jpg
LPC-100.jpg
LPC-150.jpg
OriginalImage.jpg
LPH-18.jpg
LPH-20.jpg
LPV-35.jpg
LPV-60.jpg
LPV-100.jpg
LPVL-150.jpg
LPV-150.jpg
LPHC-18.jpg
LPC-20.jpg
LPC-35.jpg
LPC-60.jpg
LPC-100.jpg
LPC-150.jpg

LP Series

$0.00

Wattage: 18W~150W

Features:

  • 90~264VAC input (except for 18W and 150W)

  • Slim plastic case with IP67 level

  • Economical design

  • Withstand 300VAC surge input for 5 seconds (LPV/C-20/35/60/100)

  • -30~70℃ wide operation range

  • Suitable for economical LED lighting and moving sign applications

  • Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPVL-150 only)

Datasheet:

C.V.：LPH-18 / LPV-20 / LPV-35 / LPV-60 / LPV-100 / LPVL-150 / LPV-150

C.C.：LPHC-18 / LPC-20 / LPC-35 / LPC-60 / LPC-100 / LPC-150

Model:

Wattage: 18W~150W

Features:

  • 90~264VAC input (except for 18W and 150W)

  • Slim plastic case with IP67 level

  • Economical design

  • Withstand 300VAC surge input for 5 seconds (LPV/C-20/35/60/100)

  • -30~70℃ wide operation range

  • Suitable for economical LED lighting and moving sign applications

  • Type "HL" LED drivers for use in Class I, Division 2 hazardous (Classified) location luminaries (LPVL-150 only)

Datasheet:

C.V.：LPH-18 / LPV-20 / LPV-35 / LPV-60 / LPV-100 / LPVL-150 / LPV-150

C.C.：LPHC-18 / LPC-20 / LPC-35 / LPC-60 / LPC-100 / LPC-150

Model: C.V.

LPH-18

18W Single Output Switching Power Supply

  • Constant Voltage (C.V.) Design: Delivers a stable, fixed voltage output ideal for LED strips and moving signs.

    Economical Plastic Casing: Housed in a fully isolated, UL 94V-0 flame-retardant plastic enclosure.

    Non-PFC Design: Optimized as a highly cost-effective, low-maintenance power solution without active power factor correction.

    Complete Ingress Protection: Fully encapsulated to meet IP67 standards, shielding internal components from dust and wet/damp environments.

    Class II Power Unit: Double-insulated design without a frame ground (no F.G. wire required).

    Silent Cooling: Operates entirely without fans, utilizing free air natural convection cooling.

    Input Surge Withstand: Engineered to tolerate a 300VAC input voltage surge for up to 5 seconds (applicable to LPV-20 through LPV-100 models).

    Integrated Safety Protections: Automatic trip recovery safeguards against Short Circuit, Overload, and Over Voltage (with Over Temperature protection added on LPV-150/LPVL-150 models).

    Reliability Testing: Subjected to a strict 100% full-load factory burn-in validation process.

  • LPH-18 Series (18W Max | 180~264VAC Input)

    • LPH-18-12: 12V output voltage | 1.5A rated current | 18W maximum power

    • LPH-18-24: 24V output voltage | 0.75A rated current | 18W maximum power

    • LPH-18-36: 36V output voltage | 0.5A rated current | 18W maximum power

LPV-20

20W Single Output Switching Power Supply

  • Constant Voltage (C.V.) Design: Delivers a stable, fixed voltage output ideal for LED strips and moving signs.

    Economical Plastic Casing: Housed in a fully isolated, UL 94V-0 flame-retardant plastic enclosure.

    Non-PFC Design: Optimized as a highly cost-effective, low-maintenance power solution without active power factor correction.

    Complete Ingress Protection: Fully encapsulated to meet IP67 standards, shielding internal components from dust and wet/damp environments.

    Class II Power Unit: Double-insulated design without a frame ground (no F.G. wire required).

    Silent Cooling: Operates entirely without fans, utilizing free air natural convection cooling.

    Input Surge Withstand: Engineered to tolerate a 300VAC input voltage surge for up to 5 seconds (applicable to LPV-20 through LPV-100 models).

    Integrated Safety Protections: Automatic trip recovery safeguards against Short Circuit, Overload, and Over Voltage (with Over Temperature protection added on LPV-150/LPVL-150 models).

    Reliability Testing: Subjected to a strict 100% full-load factory burn-in validation process.

  • LPV-20 Series (15W–20W Max | 90~264VAC Input)

    • LPV-20-5: 5V output voltage | 3.0A rated current | 15W maximum power

    • LPV-20-12: 12V output voltage | 1.67A rated current | 20W maximum power

    • LPV-20-15: 15V output voltage | 1.33A rated current | 20W maximum power

    • LPV-20-24: 24V output voltage | 0.84A rated current | 20W maximum power

LPV-35

35W Single Output Switching Power Supply

    • Constant Voltage (C.V.) Design: Delivers a stable, fixed voltage output ideal for LED strips and moving signs.

    • Economical Plastic Casing: Housed in a fully isolated, UL 94V-0 flame-retardant plastic enclosure.

    • Non-PFC Design: Optimized as a highly cost-effective, low-maintenance power solution without active power factor correction.

    • Complete Ingress Protection: Fully encapsulated to meet IP67 standards, shielding internal components from dust and wet/damp environments.

    • Class II Power Unit: Double-insulated design without a frame ground (no F.G. wire required).

    • Silent Cooling: Operates entirely without fans, utilizing free air natural convection cooling.

    • Input Surge Withstand: Engineered to tolerate a 300VAC input voltage surge for up to 5 seconds (applicable to LPV-20 through LPV-100 models).

    • Integrated Safety Protections: Automatic trip recovery safeguards against Short Circuit, Overload, and Over Voltage (with Over Temperature protection added on LPV-150/LPVL-150 models).

    • Reliability Testing: Subjected to a strict 100% full-load factory burn-in validation process.

  • LPV-35 Series (30W–36W Max | 90~264VAC Input)

    • LPV-35-5: 5V output voltage | 5.0A rated current (6A peak) | 30W maximum power

    • LPV-35-12: 12V output voltage | 3.0A rated current | 36W maximum power

    • LPV-35-15: 15V output voltage | 2.4A rated current | 36W maximum power

    • LPV-35-24: 24V output voltage | 1.5A rated current | 36W maximum power

    • LPV-35-36: 36V output voltage | 1.0A rated current | 36W maximum power

LPV-60

60W Single Output Switching Power Supply

    • Constant Voltage (C.V.) Design: Delivers a stable, fixed voltage output ideal for LED strips and moving signs.

    • Economical Plastic Casing: Housed in a fully isolated, UL 94V-0 flame-retardant plastic enclosure.

    • Non-PFC Design: Optimized as a highly cost-effective, low-maintenance power solution without active power factor correction.

    • Complete Ingress Protection: Fully encapsulated to meet IP67 standards, shielding internal components from dust and wet/damp environments.

    • Class II Power Unit: Double-insulated design without a frame ground (no F.G. wire required).

    • Silent Cooling: Operates entirely without fans, utilizing free air natural convection cooling.

    • Input Surge Withstand: Engineered to tolerate a 300VAC input voltage surge for up to 5 seconds (applicable to LPV-20 through LPV-100 models).

    • Integrated Safety Protections: Automatic trip recovery safeguards against Short Circuit, Overload, and Over Voltage (with Over Temperature protection added on LPV-150/LPVL-150 models).

    • Reliability Testing: Subjected to a strict 100% full-load factory burn-in validation process.

  • LPV-60 Series (60W Max | 90~264VAC Input)

    • LPV-60-5: 5V output voltage | 8.0A rated current | 40W maximum power

    • LPV-60-12: 12V output voltage | 5.0A rated current | 60W maximum power

    • LPV-60-15: 15V output voltage | 4.0A rated current | 60W maximum power

    • LPV-60-24: 24V output voltage | 2.5A rated current | 60W maximum power

    • LPV-60-36: 36V output voltage | 1.67A rated current | 60.12W maximum power

    • LPV-60-48: 48V output voltage | 1.25A rated current | 60W maximum power

LPV-100

100W Single Output Switching Power Supply

    • Constant Voltage (C.V.) Design: Delivers a stable, fixed voltage output ideal for LED strips and moving signs.

    • Economical Plastic Casing: Housed in a fully isolated, UL 94V-0 flame-retardant plastic enclosure.

    • Non-PFC Design: Optimized as a highly cost-effective, low-maintenance power solution without active power factor correction.

    • Complete Ingress Protection: Fully encapsulated to meet IP67 standards, shielding internal components from dust and wet/damp environments.

    • Class II Power Unit: Double-insulated design without a frame ground (no F.G. wire required).

    • Silent Cooling: Operates entirely without fans, utilizing free air natural convection cooling.

    • Input Surge Withstand: Engineered to tolerate a 300VAC input voltage surge for up to 5 seconds (applicable to LPV-20 through LPV-100 models).

    • Integrated Safety Protections: Automatic trip recovery safeguards against Short Circuit, Overload, and Over Voltage (with Over Temperature protection added on LPV-150/LPVL-150 models).

    • Reliability Testing: Subjected to a strict 100% full-load factory burn-in validation process.

  • LPV-100 Series (100W Max | 90~264VAC Input)

    • LPV-100-5: 5V output voltage | 12.0A rated current | 60W maximum power

    • LPV-100-12: 12V output voltage | 8.5A rated current | 102W maximum power

    • LPV-100-15: 15V output voltage | 6.7A rated current | 100.5W maximum power

    • LPV-100-24: 24V output voltage | 4.2A rated current | 100.8W maximum power

    • LPV-100-36: 36V output voltage | 2.8A rated current | 100.8W maximum power

    • LPV-100-48: 48V output voltage | 2.1A rated current | 100.8W maximum power

LPVL-150

150W Single Output Switching Power Supply

    • Constant Voltage (C.V.) Design: Delivers a stable, fixed voltage output ideal for LED strips and moving signs.

    • Economical Plastic Casing: Housed in a fully isolated, UL 94V-0 flame-retardant plastic enclosure.

    • Non-PFC Design: Optimized as a highly cost-effective, low-maintenance power solution without active power factor correction.

    • Complete Ingress Protection: Fully encapsulated to meet IP67 standards, shielding internal components from dust and wet/damp environments.

    • Class II Power Unit: Double-insulated design without a frame ground (no F.G. wire required).

    • Silent Cooling: Operates entirely without fans, utilizing free air natural convection cooling.

    • Input Surge Withstand: Engineered to tolerate a 300VAC input voltage surge for up to 5 seconds (applicable to LPV-20 through LPV-100 models).

    • Integrated Safety Protections: Automatic trip recovery safeguards against Short Circuit, Overload, and Over Voltage (with Over Temperature protection added on LPV-150/LPVL-150 models).

    • Reliability Testing: Subjected to a strict 100% full-load factory burn-in validation process.

  • LPVL-150 Series (120W–151W Max | Low Voltage 90~132VAC Input Only)

    • LPVL-150-12: 12V output voltage | 10.0A rated current | 120W maximum power

    • LPVL-150-24: 24V output voltage | 6.3A rated current | 151.2W maximum power

LPV-150

150W Single Output Switching Power Supply

    • Constant Voltage (C.V.) Design: Delivers a stable, fixed voltage output ideal for LED strips and moving signs.

    • Economical Plastic Casing: Housed in a fully isolated, UL 94V-0 flame-retardant plastic enclosure.

    • Non-PFC Design: Optimized as a highly cost-effective, low-maintenance power solution without active power factor correction.

    • Complete Ingress Protection: Fully encapsulated to meet IP67 standards, shielding internal components from dust and wet/damp environments.

    • Class II Power Unit: Double-insulated design without a frame ground (no F.G. wire required).

    • Silent Cooling: Operates entirely without fans, utilizing free air natural convection cooling.

    • Input Surge Withstand: Engineered to tolerate a 300VAC input voltage surge for up to 5 seconds (applicable to LPV-20 through LPV-100 models).

    • Integrated Safety Protections: Automatic trip recovery safeguards against Short Circuit, Overload, and Over Voltage (with Over Temperature protection added on LPV-150/LPVL-150 models).

    • Reliability Testing: Subjected to a strict 100% full-load factory burn-in validation process.

  • LPV-150 Series (120W–153W Max | High Voltage 180~305VAC Input Only)

    • LPV-150-12: 12V output voltage | 10.0A rated current | 120W maximum power

    • LPV-150-15: 15V output voltage | 8.0A rated current | 120W maximum power

    • LPV-150-24: 24V output voltage | 6.3A rated current | 151.2W maximum power

    • LPV-150-36: 36V output voltage | 4.2A rated current | 151.2W maximum power

    • LPV-150-48: 48V output voltage | 3.2A rated current | 153.6W maximum power

Model: C.C.

LPHC-18

18W Single Output Switching Power Supply

  • Output Mode: Constant Current (CC)

    Input Voltage: 180~264VAC

    Ingress Protection: IP67 (fully encapsulated for dust and water resistance)

    Safety Standards: Class II power unit (no functional ground)

    Cooling: Free air convection

    Reliability: 100% full load burn-in test

    Protections: Short circuit, over-voltage, and over-temperature

    Design: Cost-effective, compact, and highly reliable

    Applications: Suitable for indoor/outdoor LED lighting (excluding direct sunlight) and electronic signage

    • LPHC-18-350: 16.8W (350mA output current, 6~48V DC output voltage)

    • LPHC-18-700: 17.5W (700mA output current, 6~25V DC output voltage)

LPC-20

20W Single Output Switching Power Supply

  • Output Mode: Constant Current (CC)

    Input Voltage: Universal AC input (90~264VAC) / Full range

    Surge Protection: Withstands 300VAC surge input for 5 seconds

    Ingress Protection: Fully encapsulated with IP67 rating (suitable for indoor/outdoor use)

    Cooling: Free air convection

    Reliability: 100% full-load burn-in test; high reliability

    Protection Features: Short circuit, over-voltage, and over-current protection

    Design Standards: Class 2 power unit, fully isolated plastic case (Class II, no F.G.)

    Compliance: Passes LPS (Limited Power Source); UL1310 approved

    • LPC-20-350: 350mA / 9~48V / 16.8W

    • LPC-20-700: 700mA / 9~30V / 21W

LPC-35

35W Single Output Switching Power Supply

  • Constant Current Mode: Designed specifically for stable current output.

    Universal Input: Accepts a full range of AC input (90~264VAC).

    High Surge Protection: Withstands 300VAC surge input for 5 seconds.

    IP67 Rating: Fully encapsulated plastic case for dust and moisture resistance.

    Cooling: Efficient cooling via free air convection.

    Safety & Reliability:

    • Protections: Short circuit, over-voltage, and over-current.

    • Class 2 power unit (UL1310).

    • Isolation Class II (no earth ground required).

    • 100% full-load burn-in test.

    Design: Compact, low-cost, and highly reliable.

    • LPC-35-700: 700mA / 9~48V / 33.6W

    • LPC-35-1050: 1050mA / 9~30V / 31.5W

    • LPC-35-1400: 1400mA / 9~24V / 33.6W

LPC-60

60W Single Output Switching Power Supply

  • Output Mode: Constant Current (C.C.)

    Input Voltage: 90~264VAC (Universal AC input / Full range)

    Encapsulation: Fully encapsulated with IP67-rated level

    Protection: Short circuit, overload, and over-voltage

    Surge Capability: Withstands 300VAC surge input for 5 seconds

    Cooling: Free air convection

    Safety/Standards: Class 2 power unit, pass LPS (Limited Power Source), isolation class II (no F.G.)

    Reliability: 100% full load burn-in test

    • LPC-60-1050 (1050mA)

    • LPC-60-1400 (1400mA)

    • LPC-60-1750 (1750mA)

LPC-100

100W Single Output LED Power Supply

  • Output Type: Constant Current (CC)

    Input Voltage Range: 90~264VAC / 127~370VDC

    Surge Immunity: Withstands 300VAC surge input for 5 seconds

    Efficiency: High efficiency up to 90%

    Ingress Protection: IP67 (dust-proof and waterproof)

    Design: Fully encapsulated in a fully isolated plastic case

    Safety Class: Class II power unit (no FG)

    Cooling: Free air convection

    Protections: Short circuit and over-voltage

    Reliability: 100% full-load burn-in test

    • LPC-100-350: 350mA, 143~286V, 100.1W

    • LPC-100-500: 500mA, 100~200V, 100W

    • LPC-100-700: 700mA, 72~143V, 100.1W

    • LPC-100-1050: 1050mA, 48~96V, 100.8W

LPC-150

150W Single Output LED Power Supply

  • Design Type: Constant Current (CC) LED driver

    Input Voltage: 180~305VAC (universal input range)

    Ingress Protection: IP67-rated (fully encapsulated, suitable for harsh environments)

    Efficiency: High efficiency up to 90%

    Cooling: Free air convection

    Protection: Short circuit and over-voltage protection

    Reliability: 100% full load burn-in test; high reliability, low cost

    Design Class: Class II power unit (no FG)

    Safety/Surge: Withstands 300VAC surge input for 5 seconds

    • LPC-150-350: 150W, 350mA

    • LPC-150-500: 150W, 500mA

    • LPC-150-700: 150W, 700mA

    • LPC-150-1050: 150W, 1050mA

    • LPC-150-1400: 150W, 1400mA

    • LPC-150-1750: 150W, 1750mA

    • LPC-150-2100: 150W, 2100mA

    • LPC-150-2450: 150W, 2450mA

    • LPC-150-2800: 150W, 2800mA

    • LPC-150-3150: 150W, 3150mA