51snmL1R8HL.jpg
PWM-40.jpg
PWM-60.jpg
PWM-90(DA2).jpg
PWM-120(DA2).jpg
PWM-120(DA2).jpg
PWM-200(DA2).jpg
51snmL1R8HL.jpg
PWM-40.jpg
PWM-60.jpg
PWM-90(DA2).jpg
PWM-120(DA2).jpg
PWM-120(DA2).jpg
PWM-200(DA2).jpg

PWM Series

$0.00

Wattage : 40W~200W

Features　:

  • 90~305VAC input, built-in active PFC function

  • Fully isolated plastic case with IP67 level

  • Constant voltage PWM style output

  • Class II design, without FG

  • No load power consumption<0.5W

  • Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off)

  • Suitable for LED strip lighting

Data Sheet C.V.：PWM-40 / PWM-60(DA2) / PWM-90(DA2) / PWM-120(DA2) / PWM-200(DA2)

Model:

Wattage : 40W~200W

Features　:

  • 90~305VAC input, built-in active PFC function

  • Fully isolated plastic case with IP67 level

  • Constant voltage PWM style output

  • Class II design, without FG

  • No load power consumption<0.5W

  • Built-in 3 in 1 dimming function (0~10VDC, PWM signal or resistance, dim-to-off)

  • Suitable for LED strip lighting

Data Sheet C.V.：PWM-40 / PWM-60(DA2) / PWM-90(DA2) / PWM-120(DA2) / PWM-200(DA2)

Model:

PWM-40

40W Constant Voltage PWM Output LED Driver

    • Output Mode: Constant Voltage (CV) with PWM-style output.

    • PWM Frequency: 1.47 kHz (typical).

    • Input Voltage: Universal AC input range (90–305VAC).

    • Dimming: Built-in 3-in-1 dimming function (0–10Vdc, PWM signal, or resistance).

    • Dimming Range: 0–100%.

    • Efficiency: Up to 90%.

    • PFC: Built-in active Power Factor Correction.

    • Protection: Short circuit, over-load, over-voltage, and over-temperature protections.

    • Ingress Protection: IP67-rated for dry, damp, or wet locations.

    • Design: Class II power unit (no FG pin), Class 2 power unit, and fanless design.

    • Power Consumption: Low no-load power consumption (<0.5W).

    • PWM-40-12: 12V Output

    • PWM-40-24: 24V Output

    • PWM-40-36: 36V Output

    • PWM-40-48: 48V Output

PWM-200(DA2)

200W Constant Voltage PWM Output LED Driver

    • Output Type: Constant Voltage (CV) with PWM-style output.

    • Dimming Performance: High-frequency PWM output (up to 4kHz) to maintain color temperature and brightness homogeneity; compliant with IEEE1789-2015.

    • Dimming Interface: 3-in-1 dimming (0-10V, PWM, or resistance) or DALI-2 (DA2-type).

    • Min Dimming Level: 0.2% for DA2-type models.

    • Input Voltage: 100~305VAC wide input range with active PFC function.

    • Efficiency: High efficiency up to 94%.

    • Ingress Protection: IP67-rated plastic housing suitable for indoor and outdoor dry, damp, or wet locations.

    • Operating Conditions: Wide operating temperature range (-40°C to +85°C case temperature) via free air convection.

    • Safety/Compliance: Class II power unit; "HL" type for use in Class I, Division 2 hazardous locations; suitable for emergency lighting (per IEC61347-2-13).

    • Standby Power: Low no-load power consumption (<0.5W).

    • Service Life: Typical lifetime >50,000 hours with a 5-year warranty.

    • PWM-200-12: 12V output

    • PWM-200-24: 24V output

    • PWM-200-36: 36V output

    • PWM-200-48: 48V output

PWM-60(DA2)

60W Constant Voltage PWM Output LED Driver

    • Output Mode: Constant Voltage (CV) with PWM style output (ideal for LED strips).

    • Dimming Control:

      • Blank Type: 3-in-1 dimming (0~10Vdc, 10V PWM signal, or resistance).

      • DA/DA2 Type: Built-in DALI or DALI-2 interface (compliant with IEC62386).

    • Input Voltage: Universal AC input (90~305VAC) / Full range.

    • Efficiency: High efficiency up to 90%.

    • Standby Power: No-load power consumption <0.5W.

    • Ingress Protection: Fully encapsulated IP67-rated plastic housing.

    • Safety/Standards:

      • Class II/2 design (no FG required).

      • Compliant with IEC61347-2-13 for emergency lighting applications.

      • Type "HL" for use in Class I, Division 2 hazardous (classified) locations.

    • Protection: Short circuit, overload, over-voltage, and over-temperature protection.

  • Standard / Blank Models:

    • PWM-60-12

    • PWM-60-24

    • PWM-60-36

    • PWM-60-48

    DA / DA2 Models (DALI / DALI-2):

    • PWM-60-12DA / PWM-60-12DA2

    • PWM-60-24DA / PWM-60-24DA2

PWM-90(DA2)

90W Constant Voltage PWM Output LED Driver

    • Output Mode: Constant voltage PWM style output (suitable for LED strips).

    • Dimming Functions:

      • Standard models: 3-in-1 dimming (0~10Vdc, PWM signal, or resistance).

      • DA2 models: DALI-2 interface.

    • Input Voltage: 90~305VAC wide input range.

    • Efficiency: High efficiency up to 90.5%.

    • Protection: Short circuit, overload, over-voltage, and over-temperature.

    • Design: Class II power unit (no earth/FG required), fully encapsulated for IP67 rating.

    • Standby Power: Low no-load power consumption (<0.5W).

    • Operating Temperature: Wide range (-40°C to +85°C).

    • Compliance: Safety standards including UL8750, ENEC, and IP67 rating; suitable for dry, damp, and wet locations.

  • Standard (0-10V Dimmable) Models

    • PWM-90-12

    • PWM-90-24

    • PWM-90-36

    • PWM-90-48

    DALI-2 (DA2) Models

    • PWM-90-12DA2

    • PWM-90-24DA2

    • PWM-90-36DA2

    • PWM-90-48DA2

PWM-120(DA2)

120W Constant Voltage PWM Output LED Driver

    • Output Type: Constant Voltage (CV) with PWM-style output for flicker-free dimming.

    • Input Voltage Range: 90~305VAC (127~431VDC).

    • Dimming Functionality:

      • Blank/DA-Type: Supports 3-in-1 (0-10V, PWM, resistance) dimming.

      • DA2-Type: Equipped with DALI-2 interface (compliant with IEC62386).

    • Efficiency: High efficiency up to 90.5%.

    • Ingress Protection: IP67-rated, fully encapsulated for dust and moisture resistance.

    • Power Factor: Built-in active PFC function.

    • Standby Power: Low no-load power consumption (<0.5W).

    • Protection: Short circuit, over-voltage, over-load, and over-temperature protections.

    • Design: Class II power unit (no FG/earthing required); plastic housing.

    • Compliance: Meets various international safety and EMC standards (e.g., UL, ENEC, BIS, EAC, GB).

    • PWM-120-12DA2: 12V Output, 10A

    • PWM-120-24DA2: 24V Output, 5A

    • PWM-120-36DA2: 36V Output, 3.4A

    • PWM-120-48DA2: 48V Output, 2.5A